4059q01

Extracted Content: 4059q01

Page 1

Extracted Text

General Certificate of Education Ordinary Level

WOOD TECHNOLOGY AND DESIGN 4059/1

Paper 1 Theory, Graphics and Design
SPECIMEN PAPER

Additional materials:
Answer sheet,
Coloured crayons,
Drawing paper (A2),
Metric scale rule, scale of 1:1 or 1:5,
Standard drawing equipment, Calculator.

TIME: 3 hours
INSTRUCTIONS TO CANDIDATES

Write your name, Centre number and candidate number in the spaces at the top of this page and on
all separate answer paper used.

Section A Theory FOR EXAMINER’S USE
Answer all questions.
Write your answers in the spaces provided on the question paper. | SECTION A
SECTION B

Section B Theory
Answer any three questions.
Write your answers on the separate answer paper provided.

Section C Graphics and Design SECTION C
Answer Question 16 on the A2 drawing paper provided.

At the end of the examination, fasten the separate answer paper
and drawing paper securely to the question paper. TOTAL

INFORMATION FOR CANDIDATES
Marks are given in brackets [ ] at the end of each question or part question.

Y ou are advised to spend no longer than 20 minutes on Section A, 40 minutes on Section B and 2
hours on Section C.

This question paper consists of 10 printed pages and 2 blank pages.

Copyright: Zimbabwe School Examinations Council, Specimen paper.

©ZIMSEC Specimen paper [Turn over

---

Page 2

Extracted Text

(b)

(a)

(b)

2
Section A (20 marks)

Answer all questions in this section in the spaces provided.

You are advised to spend not more than 20 minutes on this section.

Accidents which occur when using machines and power tools are
usually due to

[he property which enables wood to retain shape after
bending is called

4059/1 Specimen paper

For
Examiner's
Use

---

Page 3

Extracted Text

Figure 1 shows a section of a tree trunk.

(a)

(b)

(a)

(b)

(a)

(b)

Fig 1

Name part labelled (a).

The purpose of a long shoulder on a long and short shouldered
haunched mortice and tenon joint is

4059/1 Specimen paper

[1]

[Turn over

For
Examiner's
Use

---

Page 4

Extracted Text

(b)

(a)

Fig 2

Why is the cut wider than the thickness of the blade?

(b) =‘ The plane for cleaning the bottom of housing joints is called:

4059/1 Specimen paper

For

Use

---

Page 5

Extracted Text

10.

(a)

(b)

5

Give one form of platform for upholstery.

A suitable adhesive to bond Rexine on some platforms when
upholstering is

Figure 3 shows a fixture used in wood construction.

(a)

(b)

Fig3

Name the fixture.

Name a suitable hinge for fixing a ledged and braced door.

Where are the following parts fixed in roof construction?

(a)

(b)

Fascia board

Roofing sheets

4059/1 Specimen paper

[Turn over

For
Examiner's

---

Page 6

Extracted Text

Answer any three questions from this section on the separate answer paper provided. You are
advised to spent not more than 40 minutes

11 Mrs Chari requires a unit to place different types of cutlery in the kitchen.

(a)

(b)
12 (a)

(b)

©

Design a portable unit to store at least three different types of
cutlery in three different compartments.

State two design factors to consider in relation to cutlery.

A door has several knots and cracks. Explain the process
of painting the door.

State a method used to join the sheeting of ledged, braced and batterned
doors.

Name a machine to be used for reducing timber to the required thickness
when making doors.

4059/1 Specimen paper

8]

---

Page 7

Extracted Text

Figure 4
Complete the cutting list in Table 1.

ITEM MEMBERS QUANTITY ROUGH SAWN

L WwW Th
1. Long rails 2 75
2. Short rails 2 160 20
3. Long dividing rail 1 190 15
4, Short dividing rail 1 140 75
5. Bottom 1 200 150 4

[5]

(b) Given that the price of wood used for the jewellery box is $12.50
and labour is $7.00. Considering the addition of 10% overhead cost,
calculate the cost of making the box. [5]

4059/1 Specimen paper
[Turn over

---

Page 8

Extracted Text

ib)

(a)
(b)
©
Cc)
)

(a)
6b)

What is a business proposal?

State three contents of a business project proposal.

Give two examples of the role of management in a company.
State two forms of leadership styles.

Name one government ministry that is responsible for each of the
following:

(1) The eradication of poverty amongst youth through the funding
of projects in their communities.

(ii) Equal opportunities for men and women.
Explain the stages of manufacturing plywood

Sketch and name a method of covering ends of man-made boards in a
piece of furniture.

4059/1 Specimen paper

---

Page 9

Extracted Text

Compulsory question.
Use A2 size drawing paper for this question.

16 Figure 5 shows a Vendor’s table made of 20mm thick solid wood and legs of
40 mm x 40 mm thick. The bottom of tray is 9mm plywood rebated in.

VENDOR’S TABLE
(NOT TO SCALE )

Fig 5
Part I (10 marks)

In this part sketches should be free hand. Answers must be in the space to the right of the
vertical line on your prepared drawing paper.

(a) Name and sketch the joint at A pulled apart. [4]

4059/1 Specimen paper
[Turn over

---

Page 10

Extracted Text

(b) Sketch a method of attaching the box marked P to the under frame.

(©) Show how the legs can be shaped to improve appearance.

(d) Namea method of preventing legs from splitting when pushed or pulled.

Part II (20 marks)

Y ou need to work to a metric scale of 1:5 in this section. Draw
either first or third angle projection.

(a) The Front Elevation in the direction of arrow F.

(b) The Sectional End Elevation of part indicated by the section line XX.
(©) Include the following in your drawing:
(i) Four important dimensions to your drawing.
(ii) Your candidate number
(iii) Title of the drawing
(iv) Marks will be allocated for:
Layout and
Quality

(v) Show the projection symbol used in the drawing

4059/1 Specimen paper

10]

---

Page 11

Extracted Text

4059/1 Specimen paper

---

Page 12

Extracted Text

4059/1 Specimen paper

---